Solution #1: Connect Transcend Pen Drive To Another PC or Mac Sometimes, the USB port of your system does not work properly or the USB port itself is damaged. If your pen drive is not being recognized by the computer, and you can't format the Pendrive, this tutorial is for you. Short key to open Run: Winkey + R In. Jun 15, 2010 Insert the drive in the Mac and start Disk Utility (Utilities folder). Select the drive in the left column. Be sure to select the drive (all the way to the left) not a volume (indented below the drive name). Select the 'Partition' tab. The pen drive is working fine with PC(winXP) but not at all recognsied by MAC though the pen drive is getting power from USB port. We have 5 Mac Pro at office, I tried with each of them but no luck though there is no problem in working with PC. If the USB flash drive not detected by Mac due to hardware problems, you won't see the connected USB device under the USB Device Tree. In case it's the USB port, cable, or card reader that stops your USB drives working on the Mac, you'd better try these things before you proceed with other solutions.
The general steps to install Windows OS on a USB flash drive are like this:
- First, create a bootable USB flash drive.
- Second, download the Windows image on the bootable USB drive.
- Third, go into the BIOS settings, set the USB as the boot priority and choose to boot from USB.
![Pen drive not detected in mac Pen drive not detected in mac](https://iboysoft.com/images/resource/show-external-disks-in-finder.png)
But here comes the problem, you took the right steps and enter into the BIOS environment with success, only see that the bootable USB drive not showing up there! Why doesn't BIOS recognize or detect the bootable USB flash drive then?
Why Doesn't the Bootable USB Drive Show up in the Bios
Here we have many thinkings on solving a bootable USB not working problem, which appears to be missing somewhere. You may perhaps have attempted to reconnect the USB installation media for several times, but why the computer still doesn't recognize it? Answers are now given.
1. USB Connection Issues Resulting from Loose or Broken USB Port
Solution - Try to connect the USB drive through every USB port that is available to use on either a desktop or laptop. If necessary, find another working computer and repeat until completely exclude the factor of a not working port.
2. Incorrect BIOS Settings
Solution - You must configure the boot order sequence in BIOS settings so that your computer can make its own decision which physical device it should select to boot from. So, to make BIOS correctly detect your USB drive and pick it to boot the computer, make sure that you choose the USB as the boot sequence priority.
Microsoft word program for mac. To make bootable USB show up in BIOS, try to specify the boot order:
- Depending on the BIOS manufacturer, press and hold ESC, F1, F2, F8 or F10 during the initial startup screen, a menu shall appear.
- Choose to enter the BIOS setup and select the BOOT tab. System devices appear in order of priority.
- To give a USB device boot sequence priority over the hard drive, try to move the hard drive device to the top of the boot sequence list, expand the hard drive device to display all hard drives and move the USB device to the top of the list of hard drives.
- Save and exit the BIOS setup utility.
Besides the fixed BIOS settings, some experienced users suggest disable Safe boot and change the Boot Mode to 'CSM' or 'Legacy' instead of 'UEFI'. So, you could possibly take this piece of advice!
3. Making Bootable USB Flash Drive Is Unsuccessful
Solution - Have you checked whether your USB is really bootable or not? Some people didn't see a USB drive appearing in the BIOS boot menu only because the 'bootable' USB drive they've created is not bootable at all! Especially by means of using cmd to create bootable USB drive without any software.
To deal with bootable USB drive not showing up or recognized the issue in BIOS boot menu in Windows 10/8.1/8/7, a piece of USB bootable software could help. For example, EaseUS Todo Backup offers a feature to install Windows OS on a USB drive that ensures 100% bootable on any other computer. That is to say, using this system backup software to create a new bootable USB drive from scratch, you can easily repair bootable USB flash drive that is not showing up, detected, read or recognized!
Preparations:
- Make sure that your USB or flash drive has enough free space - larger than the system disk.
- Connect the USB to your computer.
Then, you can start to copy or clone your Windows 10/8/7.
1. Launch EaseUS Todo Backup and click System Clone. The current system partition and boot partition will be automatically selected.
2. Choose the target drive - the USB flash drive as the destination disk to clone Windows 10/8/7. Click on Advanced options and then Create a Portable Windows USB drive.
3. Click Proceed to start to cloning Windows 10/8/7 to your USB.
Table of Contents
- 1 2 Ways To Fix VMware Doesn’t Recognize USB Devices
For users who love using a VMware, they know its the beauty of cross-platforming. Because through this facility, they can run and test different programs even if they are not listed for their installed OS. For instance, you can install & use a Mac DMG file on your Windows PC with the help of virtual machines.
Many users prefer using a pen drive to check a different OS software on their PC. But when this USB is not recognized by the VMware, users feel frustrated and start to find a solution to fix this critical error. That’s why I’ve decided to help users Fix VMware Doesn’t Recognize USB Devices. This way, you’ll make your VMware detect your desired pen drives without any hassle.
2 Ways To Fix VMware Doesn’t Recognize USB Devices
Tweak Windows Administrative Tools
- Launch Windows Administrative Tools from the search bar with Administrator privileges.
- Open “Services” from “Control PanelSystem and SecurityAdministrative Tools”
- Scroll down to locate & visit “Virtual Disk”
- Change the Startup type to “Automatic” and ensure that Service Status is “Running”
Pendrive Not Detected In Mac
- Thereafter, click on Apply and then on the Ok button.
Pen Drive Not Detected
Confirm VMware Configurations
Pendrive Not Detected In Mac
In cases like when VMware Doesn’t Recognize USB Devices, there’s a chance that there might be something wrong with its configuration settings. So it’s your duty to check and set up VMware according to your needs. When there’s a USB detection problem, then you just need to check if all the things are ok with the USB controllers.
For such a cause, you are required to navigate into the settings of your VMware. Once there, go to USB Controller>>Hardware. Now it’ll be time for you to start following the onscreen instructions. Because from here, you can add USB 2.0/3.0, just make sure that you make the right choice during the process. Afterward, VMware Doesn’t Recognize USB Devices error will be fixed and your VMware workstation will start to detect your connected pen drives.
That’s all, keep visiting WindowsBoy for more.